Description
LOW VOC
ASTM F-656
Find the Right Size for Every Application
Tubes
Find the Right Size for Every Application
Metal Tin
118ml ,237ml,473ml,
946ml
Technical Specifications
| PROPERTY | VALUES |
|---|---|
| Colour | Clear |
| SPECIFIC GRAVITY | 0.845 ± 0.050 |
| BROKKFIELD VISCOSITY | Water Thin |
| VOC | Max. 550 g/l |
How to Apply
1) Stir or Shake well before use. 2) Cut the pipe square & remove all burrs. Clean & dry joining surfaces. 3) Check dry fit of pipe & fitting. Pipe should go in easily but become tight about 1/3 to 2/3 of the way into fitting.
4)Apply EaZee WELD primer & follow directions. 5) Apply even coat of S.W.Compound on pipe up to socket depth, also coat the fitting socket with a medium layer. Avoid excess and puddling. Apply a second, full layer on pipe. 6) Assemble parts quickly, while the S.W.Compound is wet. If not wet, recoat parts before assembly.
7) Push pipe fully into fitting & twist 1/8 to 1/4 turn until reaching pipe stop. Hold for 30 seconds to prevent pipe push-out. Wipe off excess. 8) Allow 5 mins. for good handling strength & 30 mins. cure time up to 160 psi, interference fit up to 2" at 16°C & above. Longer curing time needed for pipe sizes over 2", higher pressure, or temperature below 16°C. 9) Store between 5°C & 44°C. 10) DO NOT TEST WITH COMPRESSED AIR.
Brand Name Registered
Reviews
There are no reviews yet.