Description
LOW VOC
ASTM F-656
Find the Right Size for Every Application
Tubes
Find the Right Size for Every Application
Metal Tin
118ml ,237ml,473ml,
946ml
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Technical Specifications
| PROPERTY | VALUES |
|---|---|
| Colour | Clear |
| SPECIFIC GRAVITY | 0.845 ± 0.050 |
| BROKKFIELD VISCOSITY | Water Thin |
| VOC | Max. 550 g/l |
How to Apply
1) Stir or Shake well before use. 2) Cut the pipe square & remove all burrs. Clean & dry joining surfaces. 3) Check dry fit of pipe & fitting. Pipe should go in easily but become tight about 1/3 to 2/3 of the way into fitting.
4)Apply EaZee WELD primer & follow directions. 5) Apply even coat of S.W.Compound on pipe up to socket depth, also coat the fitting socket with a medium layer. Avoid excess and puddling. Apply a second, full layer on pipe. 6) Assemble parts quickly, while the S.W.Compound is wet. If not wet, recoat parts before assembly.
7) Push pipe fully into fitting & twist 1/8 to 1/4 turn until reaching pipe stop. Hold for 30 seconds to prevent pipe push-out. Wipe off excess. 8) Allow 5 mins. for good handling strength & 30 mins. cure time up to 160 psi, interference fit up to 2" at 16°C & above. Longer curing time needed for pipe sizes over 2", higher pressure, or temperature below 16°C. 9) Store between 5°C & 44°C. 10) DO NOT TEST WITH COMPRESSED AIR.
Brand Name Registered
Reviews
There are no reviews yet.